Integrated steel H beam assembling, straightening and welding machine
Specification:
The cut material plate is fed into abdominal cavity, only to press the button, it can work till the material formed into finished steel one time. During the process, manual interference is reduced. The production efficiency improved highly and equipment cost and manpower cost reduced, and equipment installation room also saved. It is the most efficient steel H beam and T beam production equipment.

Work piece flange width: 200600mm thickness: 620mm.
Work piece web highness: 3501500mm thickness: 614mm.
Main drive roll diameter: 250mm.
Main drive roll speed: 35006000mm/min.
Main drive roll speed adjust: AC frequency no rate speed adjustment
Straightening wheel diameter: 180mm
Straightening hydro-cylinder lift length: 200mm
Straightening hold wheel diameter: 380mm
Main drive roll engine power: 7.5KW.
Upper roller wheel diameter: 160mm
Upper roller lift hydro-cylinder distance: 1350mm.
Main structure external dimension(mm): 2515*2430*3530.

Supply scope:
Assembling machine: Main transmission parts, web clamp, flange clamp, upper gate press device, hydraulic alignment device, drag bar centralizing system, inlet table roller, outlet table roller, hydraulic system unit and etc.
Gantry gate welding machine: Double screw welding gun adjusting device, welding gun lean tracking device, welding gun clamping device, flux automatic recovery and transmission machine, MZ-1000S double screw and double arc sub merge arc welding machine(domestic and imported optional) and etc.
Flange straightening machine: Straightening assistant supporting wheel unit, flange left and right clamping unit, hydraulic clamping left and right stretching out and drawing back straightening wheel unit and etc.
Electric control system: Electrical cabinet, AC frequency converter, PLC programming controller and etc.
Spare parts: 5PCS buttons, 4PCS HH54PDC24V electric relay, 6PCS each 4A and 6A molten core.

Documents:
1, Instruction manual, including electric and hydraulic illustrative diagram and easy damaged parts list.
2, User manual of frequency converter, hydraulic bump station.
3, Packing list
4, Certification
5, Foundation drawing for installation.

Need to be prepared by customer:
1, foundation of installation (supplier provide drawing)
2, anchor bolts and expansion bolt.
3, complete machine basic drawing.