Model LWGY turbine flow transducer adapts to measure the liquid rate and total flow rate of low viscosity. It can be widely used in the field of petrol, chemical industrial, and metallurgy, scientific research for measuring or control. Several output and display methods can be selected.

Features:
    1, Accuracy   0.2%, 0.5%, 1% optional 
    2, Wearable    Tungsten carbide shaft and bearing, suitable for impurity like sand
    3, Corrosion resistant   suitable for corrosion fluid like seawater, ammonia, acetic acid etc.
    4, Bi-direction   measuring bi- direction flow (optional)
    5, Multi-output pulse, 4-20mA DC, total and rate display in the field
    6, Power supply 5-24VDC
    7, Explosion proof Ex ibI
    8, Seriation diameter  2,4,6,10,15,20,25,32,40,50,65, 80,100,125,150,200,250,300mm

Model LWGQ gas turbine flow transducer is a high accuracy flow sensor. Several output and display methods can be selected. It can be widely used in the field of air, natural gas and gas to be measured.

Features for Gas Flow Meter:
    1, Low pressure lose
    2, High accuracy  Common: ±1.0%, special calibrated: ±0.5%
    3, Low velocity    Minimum velocity of flow: less than 1.5m/s
    4, Compensation  With temperature and pressure compensation (optional)
    5, Lubricate with lubricated system (optional)
    6, LCD display
    7, Multi output pulse, 4-20mA DC
    8, Seriation diameter 15,25,40,50,80,100,150,200,250,300

Model LWGI insertion turbine flow transducer is suitable to big pipe to measure the water. Waste water, chemical solution, etc.

Features:

    Low pressure lose
    Good versatility: one transducer can be suitable to various pipes
    High precision: can reach ±1.0%
    Low velocity it can be used in 0.3m/s low flow velocity
    Easy to install: no special connection parts and cutoff (only LWGI-80)
    LCD display
    Various outputs: pulse, 4-20mA DC