ORIMER is a low viscocity, highly penetrative asphalt primer with special additives to improve t he bonding of bituminous 

Specifications

Solvent Based Bitumen Primer D 41

EUROPRIME SB*                                                     

Solvent based Bitumen Primer D 41                               

Description

Quick drying solvent based bitumen primer. It acts as a primer and sealer coal for masonry and concrete to improve the bonding of bituminous materials.

 Uses

• Binder for dust particles to make prior coat for membrane application.

• Act as curing compound fresh cast concrete

• Anti corrosive and Waterproofing for all masonry products like pipes, precast walls, cable trench and etc..

• Anti diffusion from Chloride, sulphate  ion ingress and carbon di oxide

• Improves the bond of bituminous materials.

• Cold applied, does not require heating, thinning and mixing.

• Anti corrosive, Anti-Bacterial and Anti-Fungus

Comply with standards

ASTM D 41 Asphalt primer for roofing, damp proofing and waterproofing BS 3416 Bitumen based coating for cold application, suitable for use in contact with potable water. 

Method of Application

The surface must be clean and free of oil, grease and any other loosely adhering particles. The surface must be dry before priming with this the primer can be applied straight from the container with standard brushes, squeegees, roller or spray equipment. The primer should be allowed to dry naturally before the application of subsequent layers

Area of Coverage

4-6 m2/Liter/coat However the coverage will depend on the porosity of the substrate. In order to ascertain the exact coverage, it is suggested a trial application is carried out at site.