competitive price 5052 Aluminum Tread Checkered Sheet for Indoor Stairs

Diamond plate stair treads are manufactured from high quality diamond plate, also known as checker plate

Aluminum plate stair treads are ideal for retrofitting over existing dangerously slick flooring in applications that require a lightweight corrosion resistant surface. Non-slip aluminum plate stair treads are a cost-effective way to create an instantly safe surface without completely replacing existing flooring.

Aluminum Tread Plate Features:
Light weight transport sector is required, Disassembling, Convenient assembling,

the best comer of an aluminum alloy step. Increase the energy-saving effect.

5052-H32 is optimal for sheet metal work because of its ability to allow for a tight radius while bending. 5052-H32 contains 2.5% magnesium. It is one of the highest strength alloys of the non-heat treatable grades. ... 6061-T6 is the most commonly used aluminum alloys

5052-H32 Aluminum Sheet is commonly used for the bodies of boats, buses, trucks, and trailers, as well as for chemical drums. It is nonmagnetic and not heat treatable

We can manufacture the Aluminum checkered sheet for you in cold rolled and hot rolled condition, our kind of products as follows:
1000 Series: 1050, 1060, 1070, 1050A, 1350, 1145, 1035, 1100, 1200, 1235,
2000 Series: 2011, 2014, 2014A, 2214, 2017, 2017A, 2117, 2218, 2618, 2219, 2024, 2124,
3000 Series: 3103, 3004, 3005, 3105, 3003,
5000 Series: 5005, 5019, 5050, 5251, 5052, 5154, 5454, 5554, 5754, 5056, 5356, 5456, 5082, 5182, 5083, 5183, 5086,
6000 Series: 6101, 6101A, , 6005, 6005A, 6351, 6060, 6061, 6063, 6063A, 6070, 6181, 6082,
7000 Series: 7003, 7005, 7020, 7022, 7050, 7075, 7475.
Alloy: 1050, 1060, 1100, 3003, 5005, 5052, 5083, 5754, 6061

Temper: H12. H14. H16. H18. H112. H22. H24. H26. H32. H34. H36. H38. H112, H111, H116, H321 O etc.
Thickness: 0.2mm, 0.21mm, 0.22 mm, 0.25mm, 0.30mm, 0.35 mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0 mm, 1.1 mm, 1.2 mm, 1.3mm, 1.4mm, 1.5mm, 1.6mm, 1.7mm, 1.8mm, 1.9mm, 2.0mm, 2.1 mm, 2.2mm, 2.3mm, 2.5mm, 2.7mm, 2.8mm, 2.9mm, 3.0mm, 4.0mm, 6.0mm, 7.0mm, 8.0mm, 10.0mm, 12 mm 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20.0mm, 22mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 60mm, 70mm, 80mm, 90mm, 100mm, 110mm, 120mm, 150mm, 180mm 200mm, 250mm, 300mm, 350mm, 400mm
Width: 1000mm, 1200mm, 1220mm, 1500mm, 2000mm, 2200mm
Length: 1000mm, 2000mm, 2440mm, 2500m, 3000mm, 3600mm, 4000mm, 12000mm
Packing: Export standard, covering with brown paper and plastic film then packed with steel band & wooden case/pallet
Origin: China

The main difference between 5052 and 6061 aluminum is that 6061 is a heat-treatable alloy and therefore stronger than 5052 aluminums. 6061 also features high resistance to stress combined with good formability and weldability.

Comparing with alloy 3003, In general, 3003 is fairly soft and has good corrosion resistance, good drawing, good workability, moderate strength, and is weldable, while 5052 is stronger and has better corrosion resistance, good drawing, good formability, higher strength, and also is weldable.

When annealed, aluminium alloy 5052 is stronger than 1100 and 3003 alloys. It is one of the higher strength, non-heat-treatable alloys and has good workability. It also has very good corrosion resistance, especially to salt water

For painting flat sheets, 5052 or 5005 alloy aluminum is recommended if material is to be fabricated after finishing. When specifying a custom paint, it is vital that a non-exposed surface is clearly identified

5052 aluminum plate is frequently used for general sheet metal work, heat exchangers, flooring panels, rivets and wires, chemical drums and other equipment, pressure vessels, treadplate, containers, and more

5052 alloy aluminum sheet offen was used in kitchen cabinets, appliances, fans and fan blades, home freezers, clock plates, fencing, and more.

5052 alloy aluminum has made its way into aircraft, bus, and truck manufacturing, road and name signs, fuel lines and tanks, streetlights, and other hallmarks of the transportation industry